|
|
Representing |
|
Custom-treated in-wall wiring from Romex, Acrolink, Oyaide, and Cardas. |
||||||||||||
|
With increased demand, you now see a variety of
commercial products, from the least-expensive to those of super-high
quality. Romex™
The Romex™ brand is made by the Southwire Company, and is ubiquitous in the construction industry. Their newer SIMpull™ products are much easier to install due to the smoother jacketing. Romex™ is available in 25-foot, 50-foot, and 100-foot boxes, and also in 250-foot (and larger) rolls. You pay what I pay for the Romex....no additional mark-up. You can choose your particular installation needs "by the box", especially if your line runs are not equal. audio excellence az regularly cryo-treats Romex™ in these lengths....treated cost is dependent on length and weight. Customers usually opt for the 7-day conditioning on the Cable Cooker™ as well. Please call or e-mail for more information and price quotes for your particular needs. Here is a straight-forward educational primer about Romex™: http://www.faqs.org/faqs/electrical-wiring/part2/section-5.html Cardas
Cardas has a long and well-deserved reputation for high-quality cabling and connectors for decades, and has introduced their UL-listed 10/2, 600 volt in-wall cable. It consists of three 10-gauge, solid-core conductors (hot, neutral, and ground), each formed with an exterior dielectric, so it is not a bare wire product like Romex. The solid-core conductors are then tightly encased with a heavy, CL-2 rated outer dielectric, glossy and smooth for easier installation around corners, studs, and joists. Cardas starts with 5/9's copper bar stock, which is among the best raw materials, then draw the copper via diamond dies, similar in process to their highly-regarded stranded wire products. This results in an "ultra-pure, super-soft" copper that gets closer to true 6/9's copper, i.e. with fewer contaminants and impurities. The drawn copper is then coated with a special vapor that acts as a oxidation-retardant. All-in-all, a very high quality in-wall solution, especially for long runs from panel to receptacle.
The Cardas may be ordered by-the-foot, as much or as little as necessary....$12.00
per foot. Oyaide EE/FS in-wall cabling in a 3-conductor, 12-gauge and 10-gauge solid-core design in-wall cable.
EE/FS 2.6 (10-gauge)....$125 per meter
Custom lengths per special order. Cryogenic
treatment, and 7-day conditioning on the Cable Cooker™ is additional.
Conductor: Acrolink 6N-P4060F ...six-nines OFC, 10-gauge copper, in-wall cable.
Extraordinarily high-quality, ultra-pure conductors for the ultimate in music and home cinema systems.
$160 per meter....custom lengths per
special order. Cryogenic treatment, and 7-day conditioning on the Cable Cooker™ is
additional. Acrolink 6N-P4060F Specifications:
We
accept
|
|||||||||||||
|
|||||||||||||
